Abit WI-2P User Manual page 38

3-8 Chapter 3
NOTE: Don't forget your password. If you forget the password, you will have to
open the computer case and clear all information in the CMOS before you can start up
the system. But by doing this, you will have to reset all previously set options.
MPS Version Control For OS:
This item specifies which version of MPS (Multi-Processor Specification) this
workstation board will use. The options are 1.1 and 1.4. The default setting is 1.4. If
you use an older OS for dual processor executing, please set this option to 1.1.
Small Logo(EPA) Show:
This item determines to show the EPA logo when booting.
WI-2P