Download Print this page

Before You Call - Frigidaire FFFU06M1TW Use & Care Manual

Advertisement

BEFORE YOU CALL

PROBLEM
APPLIANCE OPERATION
Appliance does
not run.
Interior tempera-
ture is too cold.
Interior tempera-
ture is too warm.
SOUND AND NOISE
Vibrating or
rattling noise.
WATER/MOISTURE/FROST INSIDE APPLIANCE
Moisture forms on
inside walls.
8
CAUSE
• Appliance may not
be plugged in or plug
may be loose.
• House fuse blown or
tripped circuit breaker.
• Socket is defective.
• The temperature is
set too cold or the
appliance is set on
MAX setting.
• Temperature Control
is set too warm.
• Door is kept open too
long or is opened
too frequently.
• Large amounts of
warm or hot food
may have been
stored recently.
• Appliance has recently
been disconnected for
a period of time.
• Appliance is not level. It
rocks on the floor when
it is moved slightly.
• Floor is uneven or
weak. Appliance rocks
on floor when it is
moved slightly.
• Appliance is touching
the wall.
• Weather is hot
and humid, which
increases internal rate
of frost build-up.
• Door may not be
seating properly.
• Door is kept open too
long, or is opened
too frequently.
CORRECTION
• Ensure plug is tightly pushed into outlet.
• Check/replace fuse with a 15-amp time-
delay fuse. Reset circuit breaker.
• Call a qualified electrician.
• Turn control to a warmer setting.
• Turn control to a colder setting. Allow sev-
eral hours for the temperature to stabilize.
• Warm air enters the appliance every
time the door is opened. Open the door
less often.
• Wait until the appliance has had a chance to
reach its selected temperature.
• Appliance requires 24 hours to cool
down completely.
• Level the unit. Refer to "Leveling" in the
First Steps Section.
• Ensure floor can adequately support
appliance. Level the appliance by putting
wood or metal shims under part of
the appliance.
• Re-level the appliance or move appliance
slightly. Refer to "Leveling" in First Steps.
• This is normal.
• Carefully warm the leaking sections of
the lid seal with a hair dryer set on "cool".
Simultaneously shape the warmed door
seal by hand so that it seats correctly.
• Open the door less often.

Hide quick links:

Advertisement

loading