Table of Contents
Advertisement
4.2
Suitable cables for the SCALANCE W786
Cable specification
The following table lists the requirements for a cable depending on the use case.
Application
Direct 48 V DC supply
Power supply adapter 12 - 24 V DC
Power supply adapter 110 - 230 V AC
Ethernet
Multimode FO cable
Antenna connector
Operating Instructions (compact) SCALANCE W-786
Operating Instructions, ,
4.2 Suitable cables for the SCALANCE W786
Specification
Round cable cross-section with 6 to 8 mm
•
diameter.
Permitted tensile load at least 100 N.
•
Round cable cross-section with 6 to 8 mm
•
diameter.
•
Permitted tensile load at least 100 N.
Round cable cross-section with 6 to 8 mm
•
diameter.
Three-core cable with 0.5 - 2.5 mm
•
section of the individual cores.
Permitted tensile load at least 100 N.
•
IE FC TP Standard Cable GP 2 x 2 (type A)
Order no. 6XV1 840-2AH10
IE TP Torsion Cable 2 x 2 (type C)
Order no. 6XV1 870-2F
IE FC TP Trailing Cable 2 x 2 (type C)
Order no. 6XV1 840 3AH10
FO Standard Cable GP
Order no. 6XV1 873-2A
Minimum bending radius 65 mm.
You will find detailed information on
preassembled cable lengths and connectors in
the catalog "IK PI".
IWLAN antenna extension cable FRNC
Length 5 m
Order no. 6XV1 875-3FH50
Length 15 m
Order no. 6XV1 875-3FN15
Connecting
cross
2
35
Advertisement
Table of Contents
