LG 22LN4000-TA Owner's Manual page 33

Sound Mode Selects one of the preset sound
modes or customize each option in
each mode.
Mode
Standard
Music
Cinema
NOTE
y If sound quality or volume
y
is not at the level you want,
it is recommended to use a
separate home theater system
or amplifier to cope with
different user environments.
Option
Treble
Bass
Reset
This feature may not be applied based on country
broadcasting circumstance.
Stereo/Dual Reception
Select when you
want standard-
When a programme is selected, the sound information
quality sound.
for the station appears with the programme number and
Select when you station name.
listen to music.
1
Select when you
watch movies.
Controls the
dominant sounds
in the output.
When you turn up
the treble, it will
increase the output
DUAL I
to the higher
frequency range.
DUAL I I
Controls the softer
sounds in the
DUAL I+I I Sends a separate language to each
output. When you
turn up the bass,
it will increase the
output to the lower
Nicam Reception
frequency range.
Resets the sound
If the TV is equipped with a receiver for NICAM reception,
mode to the default
high quality NICAM (Near Instantaneous Companding
setting.
Audio Multiplex) digital sound can be received.
Sound output can be selected according to the type of
broadcast received.
1
2
3
4
CUSTOMIZING TV SETTING
Press I/II and press the One/Two and press OK.
Broadcast
Mono MONO
Stereo STEREO
Dual DUAL I , DUAL II , DUAL I + II
y Mono sound selection
y
If the stereo signal is weak in stereo reception, you
can switch to mono. In mono reception, the clarity of
sound is improved.
y Language selection for dual language
y
broadcast
a programme can be received in two languages (dual
language), you can switch to DUAL I, DUAL II or
DUAL I + II.
Sends the primary broadcast language
to the loudspeakers.
Sends the secondary broadcast lan-
guage to the loudspeakers.
loudspeaker.
When NICAM mono is received, you can select
NICAM MONO or MONO.
When NICAM stereo is received, you can select
NICAM STEREO or MONO.
If the stereo signal is weak, switch to MONO.
When NICAM dual is received, you can select
NICAM DUAL I, NICAM DUAL II or NICAM DUAL
I+II or MONO.
33
On Screen Display