Inserting The Snap-In Adapter; Inserting The Mobile Phone - BMW 116i 2011 Owner's Handbook Manual

Calling a number from the list
Select an entry.
The connection is established.
Saving an entry in Contacts
1. Mark entry.
2. Call up "Options".
3. "Save as new contact" or "Add to existing
contact"
4. Select the type of number: "Home", "Work",
"Mobile" or "Others"
5. If necessary, complete the entries.
6. If applicable, "Save contact in car"
Hands-free system
General
Calls taken via the hands-free system can be
continued via the mobile phone and vice versa.
From mobile phone to the hands-free
system
Calls that were started outside the Bluetooth
range of the vehicle can be continued via the
hands-free system when the ignition is switched
on.
Depending in the mobile phone, there is an au‐
tomatic switch to the hands-free mode.
If it is not automatically toggled, follow what is
displayed on the mobile phone screen, and also
see the instruction manual for the mobile phone.
From the hands-free system to the
mobile phone
Calls taken via the hands-free system can also
be continued via the mobile phone, depending
on the mobile phone.
Then follow what is displayed on the mobile
phone, and also see the instruction manual of
the mobile phone.
204
Online Edition for Part no. 01 40 2 607 643 - 07 11 490
Snap-in adapter*
General
More detailed information on the snap-in adapt‐
ers which compatibly support the functions of
the handy can be obtained from the Service cen‐
tre.
Notes
At high temperatures, the charging function of
the mobile can be restricted and no longer op‐
erate.
When using the mobile through the vehicle, fol‐
low the user manual of the mobile.
Installed position
In the centre armrest.

Inserting the snap-in adapter

1. Press the button and take out the cover.
2. Insert snap-in adapter at the front, arrow 1,
and press to the bottom, arrow 2, until the
adapter engages.

Inserting the mobile phone

1. Depending on the mobile phone, remove
the protective cap from the aerial connector