ASSEMBLY
PARTS
IDENTIFICATION
COVER
UPPER CHUTE
FULL
BAGGER
INDICATOR
CHUTELATCH
GRASS
CATCHER
CONTAINERS
%,
\
LOWER
CHUTE
_
"_'_
LOWER
CHU'_
E
ATTACHING
STRAPS
NOTE: When right hand (R H.) and left hand (L.H.) are mentioned in this man ua, t means when you are seated on the tractor,
in the operator's position_
THESE ARE THE TOOLS YOU WILL NEED TO
ASSEMBLE YOUR GRASS CATCHER:
(1) 3/8" Wrench
(1) 1/2" Wrench
(2) 9/16" Wrenches
(1) 1/2" Socket
(1) 9/16" Deep well Socket
(1) Drive Ratchet
(1) 3" or longer Extension
(1) Short Handle
Phillips Screwdriver'
CAUTION:
BEFORE ASSEMBLING GRASS CATCHER TO TRACTOR:
•
Depress clutch/brake pedal fully and set parking brake.
•
Place gearshift/motion
control lever in "NEUTRAL"
position.
°
Place attachment clutch in "DISENGAGED"
position,
•
Turn ignition key "OFF" and remove key.
•
Make sure the blade and all moving parts have completely stopped,
•
Disconnect
spark plug wire from spark plug and place wire where it cannot come in
contact with plug,
6