Hang Hole Flow; Din Rail Flow - Honeywell HPSR103 Installation Instructions Manual

HPSR10*
MOUNTING

Hang Hole Flow

1. Hang the panel on a wall-mounted screw.
2. Level the panel.
3. Put the 2 bottom screws in.
33-00331EF—05
M37083
Fig. 1.
M37084
Fig. 2.
M37085
Fig. 3.

Din Rail Flow

1. Mount the DIN rail as per manufacturers instruc-
tions.
2. Hang panel by the tabs on the rail's top edge.
3. Snap into rail by pressing the bottom of panel
against the wall.
4. To remove, lift up on panel and pull the top away
from the wall.
2
M37086
Fig. 4.
M37087
Fig. 5.
M37088
Fig. 6.
M37089
Fig. 7.