Maintenance - Snapper GT600 Series Operator's Manual

Maintenance Chart
TRaCTOR aND MOWER
Every 8 Hours or Daily
Check safety interlock system
Clean debris off tractor and mower deck
Clean debris from engine compartment
Every 25 Hours or annually *
Check tire pressure
Check mower blade stopping time
Check tractor and mower for loose hardware
Every 50 Hours or annually *
Clean battery and cables
Check tractor brakes
See Dealer annually to
Lubricate tractor and mower
Check mower blades **
* Whichever comes first
** Check blades more often in regions with sandy soils or
high dust conditions.
Engine Maintenance
Refer to the engine owner's manual for all engine mainte-
nance procedures and recommendations.
Check the Tire Pressure
Tires should be checked periodically to provide the
optimum traction and to guarantee the best cut (see
Figure 18).
NOTE: These pressures may differ slightly from the
"Maximum Inflation" stamped on the side walls of the tires.
en
ENGINE
First 5 Hours
Change engine oil
Every 8 Hours or Daily
Check engine oil level
Every 25 Hours or annually *
Clean engine air filter and pre-cleaner **
Every 50 Hours or annually *
Change engine oil
Replace oil filter
annually
Replace air filter
Replace pre-cleaner
See Dealer annually to
Inspect muffler and spark arrester
Replace spark plug
Replace fuel filter
Clean engine air cooling system
* Whichever comes first
** Clean more often in dusty conditions or when airborne
debris is present.
Size Tread
26 x 12-12 Turf
18 x 8.5-8 Turf
26 x 12-12 Field
18 x 8.5-10 Field
Checking Tire Pressure.eps
Figure 18. Tire Pressure

Maintenance

PSI bar
12-15 0,83-1,03
20-22 1,38-1,52
10-12 0,69-0,83
20-22 1,38-1,52
27