Honeywell 8832101S User Manual page 8

INSTALLING INTERIOR ASSEMBLY
11. Installing Batteries
a. Insert 4 AA high quality Alkaline batteries into the Battery Compartment in the
direction noted +/- on the Compartment. The Lock will beep 2 times, the keypad will illuminate blue, and the
Honeywell button will flash green twice to signify that it has received power (Figure 11a).
NOTE: Do not touch the Keypad until the blue light turns off.
Do not use rechargeable batteries or non-alkaline batteries.
b. Slide the Battery Cover down into the track on the Interior Assembly to cover the batteries (Figure 11b).
Light Indicator
Override
Access Key
12. Testing Lock
With the Door Open
a. Test the Lock using the Interior Knob. The Latch should move smoothly.
b. Test the lock using the Keypad. To lock press and then press " 1234"
to unlock.
INSTALLATION OVERVIEW
Keypad
Exterior Assembly
Strike Plate
Mounting Plate
3/4" (19mm) screws
Keys
Interior Assembly
Interior Assembly
Optional
3/4" (19mm) screw
7/8" (22mm) screws
Latch
Exterior Assembly
Tailpiece
Rubber Gasket
6
Battery
Cover
Interior
Knob
Figure 11a-b
Battery Cover
5/16" (8mm) screws
1" (25mm) Screw