Table of Contents
Advertisement
B.O.L.T Chest ECG User Manual
4. Clip/button the ECG Electrode cable to the disposable ECG electrode as shown below.
5. Once the setup is connected ensure that the user is comfortable with the
measurement.
6. Switch ON the mobile device, and Enable Bluetooth & Wi-Fi Internet Connectivity.
7. Switch ON the ECG device using the slide power button.
8. Blue LED on the ECG device will start blinking, which means that the ECG device is
searching for Bluetooth device for pairing.
9. Launch the B.O.L.T application from the mobile device.
10. On successful login, Choose Check vitals menu.
11. Choose the ECG option from the mobile application test list.
12. Choose the ECG device from the available list of vitals devices.(e.g. AMI Chest ECG 01)
13. Confirm the device selection and provide default pairing password 1234 for pairing
the ECG device (on request for the first time pairing).
14. Ensure that the Bluetooth LED stops blinking in the E.C.G device.
15. Select "Start" option to perform the ECG data monitoring/measurement.
16. Monitoring vitals data will be displayed within a couple of minutes on the application
screen.
17. Once the test is completed, Click Stop and proceed back to home screen.
18. Click
to upload the result to the cloud on demand for further analysis.
19. Kindly ensure to remove the disposable ECG electrodes from the user body and
dispose in the disposable container after completing the test.
On Successful pairing of the mobile device, Blue LED stops blinking
in the device. Ensure that the save option is enabled for storing the data
in the cloud.
© Copyright 2018, All Rights Reserved. American Megatrends India Private Ltd.
Model No: VA 07
Page | 11
Advertisement
Table of Contents
