Adjusting The Position Of The Movable Knife - Brother BAS-341H Instruction Manual

7. STANDARD ADJUSTMENTS

7-10. Adjusting the position of the movable knife

3482B
5255Q
1. Open the top cover and tilt back the machine head.
2. Turn the pulley (1) by hand to lower the needle bar to its lowest position, and push the thread trimmer solenoid (2) as far
as it will go.
3. With the collar (3) inserted into the groove of the thread trimmer cam (4), turn the pulley (1) by hand to set the driving lever
(5) to the reverse position (when the thread take-up (6) is close to its lowest position).
3500B
4.
Remove the rubber cap (7).
5.
Loosen the bolt (8).
6.
Move the movable knife connecting plate (10) back and forth to adjust so that the distance from the ridge on the right
side of the needle plate to the ridge on the movable knife (9) is 9.5 to 9.9 mm.
7.
After tightening the bolt (8), check the above position once more.
41
＜View from side of thread trimmer cam＞
BAS-341H, BAS-342H
Reverse position
(position where driving lever
is at its lowest point)
5232Q 3499B
5233Q
4041M