Specifications; Product Specifications; Commonservice Parts - Briggs & Stratton BRUTE Operator's Manual

Hide thumbs Also See for BRUTE:
Table of Contents

Advertisement

Available languages

Available languages

.=$$Ul'e
Product Specifications
Max Outlet Pressure ...........
2,700 PSi (186.1 BARS)*
Max How Rate ................
2.3 GPM (8.7 litersimin)
Water Supply Temperature ...........
100°F(38°0) MAX
Displacement ...................
10.69 cu. in. (175 cc)
Spark Plug Gap ...................
0.020 in. (0.50 ram)
FuelCapacity ......................
1.6 Qt. _1.5 Liters}
Oil Capacity ....................
20 Ounces (0.6 Litersl
CommonService Parts
PumpSaver ..................................
6039
O-Ring Maintenance Kit ....................
196002GS
Water nlet Screen .........................
B2384GS
Air Cleaner ................................
797301
Spark Plug ..........................
692051 or 5066
Engine Oil Bottle ...................
100005 or 100028
FuelStabilizer .....................
100120 or 100117
Spark Arrestor ..............................
690813
Power Ratings: The gross power rating for individual gas engine models is labeled in accordancewith SAE (Society of
Automotive Engineers)code J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has been
obtained and corrected in accordancewith SAEJ1995 (Revision 2002-05). Torque values are derived at 3060 RPM; horsepower
values are derived at 3600 RPM. The gross power curves can be viewed at www.BRIGGSandSTRATTON.OOM. Net power
values are taken with exhaust and air cleaner installed whereas gross power values are collected without these attachments.
Actual gross engine power will be higher than net engine power and is affected by, among other things, ambient operating
conditions and engine-to-engine variability. Giventhe wide array of products on which engines are placed,the gas engine may
not develop the rated gross power when used in a given pieceof power equipment. This difference is due to a variety of factors
including, but not limited to, the variety of engine components (air cleaner, exhaust, charging, cooling, carburetor, fuel pump,
etc.), application limitations, ambient operating conditions (temperature, humidity, altitude), and engine-to-engine variability.
Due to manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for this Series
engine.
* This pressure washer is rated in accordanceto the Pressure Washer Manufacturers Association (PWMA) standard PWl01
(Testing and Rating Performanceof Pressure Washers).
griggs & Stratton PowerProductsGroup,LLC
P.O. Box702
Milwaukee,Wisconsin, 53201°0702 U.S.A.
28
(800) 743-4115
www.brutepewer.eem

Advertisement

Chapters

Table of Contents
loading

Table of Contents