Table of Contents
Advertisement
Hardware Setup
3-9
(10). COM2: Onboard Serial Port Header
Use this header to connect to second serial port with an extension bracket.
(11). FDD1 Connector
There are 34 wires and two connectors on each floppy cable providing two floppy disk drives
connection. Connect the single end at the longer length of ribbon cable to this FDC1, and the
two connectors on the other end to the floppy disk drives. Generally you need only one floppy
disk drive in your system.
Note: The red line on the ribbon cable should be aligned with pin 1 on this connector.
User's Manual
Advertisement
Table of Contents
