Grandstream Networks GWN7000 User Manual page 61

Client Bridge Support
RADIUS Sever Address
RADIUS Server Port
RADIUS Server Secret
RADIUS Accounting Server
RADIUS Accounting Server
Port
RADIUS Accounting Server
Secret
Client Time Policy
Use MAC Filtering
Client Isolation
Configures the client bridge support to allow the access point to be
configured as a client for bridging wired only clients wirelessly to the
network. When an access point is configured in this way, it will share the
WiFi connection to the LAN ports transparently. Once a SSID has a Client
Bridge Support enabled, the AP adopted in this SSID can be turned in to
Bridge Client mode by click the Bridge button.
Configures RADIUS authentication server address.
Configures RADIUS Server Listening port (default is: 1812).
Enter the secret password for client authentication with RADIUS server.
Configures the address for the RADIUS accounting server.
Configures RADIUS accounting server listening port (defaults to 1813).
Enter the secret password for client authentication with RADIUS
accounting server.
Select a time policy to be applied to all clients connected to this SSID.
Choose Blacklist/Whitelist
excluded/included from connecting to the zone's Wi-Fi. Default is
Disabled.
Client isolation feature blocks any TCP/IP connection between connected
clients to GWN7600/GWN7600LR's Wi-Fi access point. Client isolation
can be helpful to increase security for Guest networks/Public Wi-Fi.
Three modes are available:
• Internet Mode: Wireless clients will be allowed to access only the
internet services and they cannot access any of the management
services, either on
GWN7600/GWN7600LR.
• Gateway MAC Mode: Wireless clients can only communicate with
the gateway, the communication between clients is blocked and
they cannot access any of the management services on the
GWN7600/GWN7600LR access points.
•
Radio Mode: Wireless clients can access to the internet services,
GWN7xxx router and the access points GWN7600/GWN7600LR but
they cannot communicate with each other.
GWN7000 User Manual
Version 1.0.6.28
to specify MAC addresses
the router nor the
to be
access points
P a g e |
61