EnGenius EPE-4818G Installation Manuals

EPE-4818G
EPE-4818G Data sheet Version 290414
** All specifications are subject to change without notice.
OVERVIEW
The EPE-4818G PoE generates safe power over category 6/5e/5. By
sending 48V, Ethernet terminals which need more power such as
wireless LAN high power device, IP media center, and web camera are
powered remotely.
EPE-4818G offers power supply up to 48V/0.5A with Ethernet cable. 4
Pairs are with data transmission; pin # 4,5 and 7,8 with power enabled to
device via center tap (center tap is a connection made to a point half way
along a winding of a Transformer).
Product Specification
-Standards
-Protocol
-Ports
-Data Lines
-Power
-Diagnostic LEDs
-Power Consumption
-Temperature
-Humidity
-Dimension
-Package Content
Learn more about EnGenius Solutions at www.engeniustech.com.sg
GIGABIT PoE INJECTOR (Propietory)
IEEE802.3 10Base-T, IEEE802.3u 100Base-T, IEEE802.3ab
Gigabit Ethernet
CSMA/CD
1 x Data-in, 1 x PoE Out, 1 x DC Jack
Pair1 : Pin1&2, Pair2 : Pin3&6, Pair3 : 4&5, Pair4 : 7&8
Input : AC100-240V, 50-60Hz
Output : DC48V/0.5A
Power on : Green
24W
o
Operating : 0 to 60 C, Storage : -30 to 80
5% to 95%
82mm x 46mm x 21mm
-EPE-4818G x 1
-AC/DC Adapter 100V~240V AC 50~60Hz x 1
-Installation Guide x 1
o
C
ACCESSORIES
EPE-4818G