Seagate MEDALIST 17240 ST313030A Installation Manual page 12

8 Medalist 17240, 13030, 10231, 8420 and 4310, Rev. B
Interface
connector
Figure 4. Cable connectors
Note. If you are mounting the drive in a 5.25-inch drive bay, you
need a mounting adapter or frame kit. Contact your com-
puter dealer. Some computers also require drive mount-
ing rails, which can be obtained from your distributor or
computer manufacturer.
5. Attach a power cable to each drive. If your computer does not
have an unused power connector, you can purchase a Y-
shaped power cable from your computer dealer.
6. Check all cable connections and then replace your computer
cover. Continue to "Configuring Your Computer."
Power
connector
Pin 1