Adjusting The Picture - Philips ENVISION P851 Service Manual

LCD Color Monitor ENVISION P851

3.3 Adjusting the Picture

OSD Settings
1.Press the MENU-button to activate the OSD window.
2.Press+ or - to navigate through the functions. Once the desired function is highlighted, press the MENU-buttonto
activate it.If the function selected has a sub-menu, press or again to navigate through the sub-menu functions.Once
the desired function is highlighted, press MENU-button to activate it.
3.Press+ or - to change the settings of the selected function. To exit and save, select the exit function. If you want to
adjust any other function, repeat steps 2-3.
4.OSD Lock Function: To lock the OSD, press and hold the Menu button while the monitor is off and then press
power button to turn the monitor on. To un-lock the OSD - press and hold the Menu button while the monitor is off
and then press power button to turn the monitor on.
5.Eco Mode and DCR hot key : Press the Eco key continuously to select the Eco mode of brightness and DCR on
when there is no OSD ( Eco mode hot key may not be available in all models).
6.4:3 or wide image ratio hot key: When there is no OSD, press + continuously to change 4:3 or wide image ratio. (If
the product screen size is 4:3 or input signal resolution is wide format, the hot key is disalbe to adjust.)
7.Auto configure hot key: When the OSD is closed, press Auto button will be auto configure hot key function .
7