Seagate ST31000322CS Product Manual page 13

Drive specification
Operational Shock (max.)
Non-Operational Shock (max.)
Vibration, operating
Vibration, non-operating
Drive acoustics, sound power
Idle**
CE Seek Profile
Nonrecoverable read errors
Annualized Failure Rate (AFR)
Warranty
Contact start-stop cycles
Supports Hotplug operation per the
Serial ATA Revision 2.6 specification
*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment
and formatting.
**During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and
power to operational levels.
Pipeline HD.2 Series SATA Product Manual, Rev. E
ST31000424CS
70 Gs at 2ms (read)
30 Gs at 2ms (write)
350 Gs at 2ms
5Hz to 350Hz: 0.50 Gs
350Hz to 500Hz: 0.25 Gs
5Hz to350Hz: 5.0 Gs
350Hz to 500Hz: 1.0 Gs
2.1 bels (typical)
2.3 bels (max.)
2.4 bels (typical)
2.5 bels (max.)
15
1 per 10 bits read
0.55%
To determine the warranty for a specific drive, use a web browser to access the following web
page: support.seagate.com/customer/warranty_validation.jsp
From this page, click on the "Verify Your Warranty" link. You will be asked to provide the drive
serial number, model number (or part number) and country of purchase. The system will dis-
play the warranty information for your drive.
50,000 at 25°C, 50% rel. humidity
Yes
ST31000322CS
5