1. Click the checkbox(es) to the left of the pool(s) you want to delete.
2. Click Delete Pool.
3. Click OK to confirm the deletion.
Creating a File-Based Device
1. Click Create File Device.
2. Select the volume and specify how much space should be used from this volume.
Expanding a File-Based Device
If you did not use the entire volume to create your file-based device, you can expand it as
more storage is needed.
To expand a file-based device:
1. Click the checkbox to the left of the file-based device.
2. Click Expand File Device.
3. Indicate how much space to add and click OK.
Deleting a File-Based Device
NOTE:
You can only disable a file-based device if it is not being used.
1. Click the checkbox to the left of the file-based device.
2. Click Delete File Device.
3. Click OK to confirm.
Viewing Device Layout
You can see how the segments of a device are being used, including whether it contains
LUs.
To view device layout for an iSCSI storage device that is not in a pool:
1. Click the checkbox to the left of the device you want to view.
2. Click View Device Layout.
HP iSCSI Feature Pack User Guide
10