Seagate ST3250623NS Product Manual page 11

Table 1: Drive specifications
Drive specification
Temperature gradient
(°C per hour max)
Relative humidity
Relative humidity gradient
Wet bulb temperature
(°C max)
Altitude, operating
Altitude, nonoperating
(meters below mean sea level, max)
Shock, operating (max at 2 msec)
Shock, nonoperating (max at 2 msec)
Vibration, operating
Vibration, nonoperating
Drive acoustics, sound power (bels)
Idle*
Performance seek
Nonrecoverable read errors
MTBF (Mean Time Before Failure)
Service life
Warranty
Contact start-stop cycles
(25°C, 50% relative humidity)
Supports Hotplug operation per SATA II
specification
*During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase
acoustic and power to operational levels.
NL35 Series SATA Product Manual, Rev. B
ST3400832NS ST3400632NS
20°C (operating)
30°C (nonoperating)
5% to 90% (operating)
5% to 95% (nonoperating)
30% per hour max
37.7 (operating)
40.0 (nonoperating)
–60.96 m to 3,048 m
+
(–200 ft to 10,000 ft)
–60.96 m to 12,192 m
+
(–200 ft to 40,000 ft)
63 Gs
300 Gs
5–22 Hz: Limited displacement
23–350 Hz: 0.5 G acceleration
5–22 Hz: Limited displacement
23–350 Hz: 5 Gs acceleration
2.8 (typical)
3.4 (max)
3.7 (typical)
3.9 (max)
14
1 per 10 bits read
1,000,000 hours
5 Years
5 years on distribution units.
To determine the warranty for a specific drive, use a web browser to access the
following web page:
www.seagate.com/support/service/
From this page, click on the "Verify Your Warranty" link. You will be asked to
provide the drive serial number, model number (or part number) and country of
purchase. The system will display the warranty information for your drive.
50,000
Yes
ST3250823NS ST3250623NS
5