Esd Safety Guidelines; Laser Safety Guidelines; Laser Classification; Laser Warning Labels - Nokia 7368 Product Manual

ETSI ONT safety guidelines

2.4 ESD safety guidelines

The ONT equipment is sensitive to ESD. Operations personnel must observe the
following ESD instructions when they handle the ONT equipment.
During installation and maintenance, service personnel must wear wrist straps to
prevent damage caused by ESD.

2.5 Laser safety guidelines

Observe the following instructions when you perform installation, operations, and
maintenance tasks on the ONT equipment.
Only qualified service personnel who are extremely familiar with laser radiation
hazards should install or remove the fiber optic cables and units in this system.
Observe the following danger for laser hazard. Eyes can be damaged when they are
exposed to a laser beam. Take necessary precautions before you plug in the optical
modules.
2.5.1
The ONT is classified as a Class 1 laser product based on its transmit optical output.
2.5.1.1
The following figures show the labels related to laser product, classification and
warning.
22
Release 05.08.01a | August 2018 | Edition 01
This equipment is ESD sensitive. Proper ESD
Caution —
protections should be used when you enter the TELCO Access
portion of the ONT.
There may be invisible laser radiation at the fiber
Danger —
optic cable when the cable is removed from the connector.
Avoid direct exposure to the laser beam.
Possibility of equipment damage. Risk of eye
Danger —
damage by laser radiation.

Laser classification

Laser warning labels

3FE-47555-AAAA-TCZZA
7368 ISAM ONT G-240W-G Product Guide
Issue: 01