Seagate ST31000340NS Product Manual page 11

Drive specification
Vibration, operating
Vibration, nonoperating
Drive acoustics, sound power (bels)
Active
Idle**
Performance seek
Quiet seek
Nonrecoverable read errors
Annualized Failure Rate (AFR)
Warranty
Contact start-stop cycles
(25°C, 50% rel. humidity)
Supports Hotplug operation per
Serial ATA Revision 2.5 specification
*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment
and formatting.
**During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and
power to operational levels.
Barracuda ES.2 Serial ATA Product Manual, Rev. A
ST31000340NS
5–22 Hz: 0.25 Gs, Limited displacement
22–350 Hz: 0.50 Gs
350–500 Hz: 0.25 Gs
5–22 Hz: 2.0 Gs, Limited displacement
22–350 Hz: 5.0 Gs
350–500 Hz: 2.0 Gs
3.25 (typical)
3.4 (max)
2.7 (typical)
2.9 (max)
3.05 (typical)
3.2 (max)
2.95 (typical)
3.1 (max)
15
1 sector per 10 bits read
0.73%
5 years on distribution units.
To determine the warranty for a specific drive, use a web browser to access
the following web page: www.seagate.com/support/service/
From this page, click on the "Verify Your Warranty" link. You will be asked to
provide the drive serial number, model number (or part number) and country
of purchase. The system will display the warranty information for your drive.
50,000
Yes
ST3750330NS
5