D-Link DCS-6511 Quick Installation Manual page 9

Thread an Ethernet cable and the power cable through
the pendant bracket.
Place the camera body onto the bracket cap and
attach the dome to the base of the camera using the
four long screws and the security screw.
Installing the Right-Angle Mount (Optional)
Attach the mounting plate to the bracket cap using the
included three screws.
Locate a suitable position on the ceiling for a 34 mm
(+2 / -0 mm) hole to be cut. Use the included template
to mark and cut the mounting holes.
Drill four 6 mm holes corresponding to the holes in the
mounting template and insert the plastic anchors into
these holes.
D-Link DCS-6511 Quick Installation Guide
Bracket
Cap
Mounting
Plate
7