Seagate BARRACUDA 7200.10 ST3400620AS Product Manual page 29

Drive specification
Vibration, operating
Vibration, nonoperating
Drive acoustics, sound power
Idle***
Quiet seek
Nonrecoverable read errors
Annualized Failure Rate (AFR)
Warranty
Contact start-stop cycles
Supports Hotplug operation per the Serial ATA Revision 2.5 specification
*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment
and formatting.
** 7200.10 family product achieved higher sustained data rate over same 7200.9 family capacity points using identical measurement
methodology.
*** During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and
power to operational levels.
Barracuda 7200.10 Serial ATA Product Manual, Rev. J
ST380815AS
5–22 Hz: 0.25 Gs, Limited displacement
22–350 Hz: 0.5 Gs
350–500 Hz:: 0.25 Gs
5–22 Hz: 0.25 Gs, Limited displacement
22–350 Hz: 5.0 Gs
350–500 Hz:: 1.0 Gs
2.8 bels (typical)
3.0 bels (max)
3.0 bels (typical)
3.2 bels (max)
14
1 per 10 bits read
0.34%
5 years on distribution units.
To determine the warranty for a specific drive, use a web
browser to access the following web page:
www.seagate.com/support/service/
From this page, click on the "Verify Your Warranty" link.
You will be asked to provide the drive serial number,
model number (or part number) and country of purchase.
The system will display the warranty information for your
drive.
50,000 at 25°C, 50% rel. humidity
Yes
ST380215AS
23