TH-37PV600E / TH-37PX600B / TH-42PV600E / TH-42PX600B
11.5. Sub-Contrast adjustment
Name of measuring instrument
RF generator
Base Band generator
1. Receive AV1 (PAL 100% Full White or Split Colour bar shown as below) .
2. Goes into service mode, choose Sub-Contrast, and it checks that data value is 512.
(It checks that an initial value is a default)
1. The colour key yellow button of remote control is pushed.
2. The OSD character of sub-contrast becomes red.
(Inside under automatic adjustment)
3. The OSD character of sub-contrast returns to white.
4. End.
1. Receive RF (PAL 100% Full White or Split Colour bar shown as below.)
2. Goes into service mode, choose Sub-Contrast, and it checks that data value is 512.
(It checks that an initial value is a default)
1. The colour key yellow button of remote control is pushed.
2. The OSD character of sub-contrast becomes red.
(Inside under automatic adjustment)
3. The OSD character of sub-contrast returns to white.
4. End.
1. Receive Component
(1080i/ 60Hz or 1080i/ 50Hz, 100% Full White or Split colour bar as shown below.)
2. Goes into service mode, choose Sub-Contrast, and it checks that data value is 384.
(It checks that an initial value is a default)
1. The colour key yellow button of remote control is pushed.
2. The OSD character of sub-contrast becomes red.
(Inside under automatic adjustment)
3. The OSD character of sub-contrast returns to white.
4. End.
Preparation (AV)
Adjustment of AV system
Preparation (RF)
Adjustment of RF system
Preparation (HD)
Adjustment of HD system
Connection
52
Remarks
Remarks
Remarks
Remarks
Remarks
Remarks
Remarks