Scotts SP6211 Operator's Manual page 32

STORING MACHINE
B
B
C
M87116a
3. Loosen knob (B) 25 mm (1 in.) on each side. Allow
upper handle (C) to pivot down.
D
E
M88835
4. Remove knob (D) and carriage bolt (E) from each side.
F
M96553
5. CAREFULLY fold lower handle (F) forward. Guide
cables inside lower handle. DO NOT CRIMP CABLES.
6. Install bolts and knobs in lower handle.
Remove Mower from Storage
1. Unfold handles. Tighten knobs. Do not crimp cables.
2. Check engine oil level.
3. Connect wire to spark plug.
4. Inspect shields, safety devices and hardware.
Storing Machine - 28