Proprietary Information; Translations; Warranty Information; Sales And Service Locations - Siemens A80485-1 Quick Start Manual

PROPRIETARY INFORMATION

Siemens Industry, Inc. has a proprietary interest in the information contained herein and, in some
instances, has patent rights in the systems and components described. It is requested that you
distribute this information only to those responsible people within your organization who have an
official interest.
This document or the information disclosed herein, shall not be reproduced or transferred to other
documents or used or disclosed for manufacturing or for any other purpose except as specifically
authorized in writing by Siemens Industry, Inc.

TRANSLATIONS

The manuals and product information of Siemens Industry, Inc. are intended to be produced and
read in English. Any translation of the manuals and product information are unofficial and can be
imprecise and inaccurate in whole or in part. Siemens Industry, Inc. does not warrant the
accuracy, reliability, or timeliness of any information contained in any translation of manual or
product information from its original official released version in English and shall not be liable for
any losses caused by such reliance on the accuracy, reliability, or timeliness of such information.
Any person or entity that relies on translated information does so at his or her own risk.

WARRANTY INFORMATION

Siemens Industry, Inc. warranty policy is as stated in the current Terms and Conditions of Sale
document. Warranty adjustments will not be allowed for products or components which have
been subjected to abuse, alteration, improper handling or installation, or which have not been
operated in accordance with Seller's instructions. Alteration or removal of any serial number or
identification mark voids the warranty.

SALES AND SERVICE LOCATIONS

Technical assistance and sales information on Siemens Industry, Inc. products may be obtained
at the following locations:
SIEMENS INDUSTRY, INC. RAIL AUTOMATION
2400 NELSON MILLER PARKWAY
LOUISVILLE, KENTUCKY 40223
TELEPHONE:
FAX:
SALES & SERVICE:
WEB SITE: USA Rail Automation Site

FCC RULES COMPLIANCE

The equipment covered in this manual has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the
interference at his/her own expense.
SIG-QG-17-05
Version No.: A
(502) 618-8800
(502) 618-8810
(800) 626-2710
ii
SIEMENS INDUSTRY, INC.RAIL AUTOMATION
939 S. MAIN STREET
MARION, KENTUCKY 42064
TELEPHONE:
CUSTOMER SERVICE:
TECHNICAL SUPPORT:
FAX:
(270) 918-7800
(800) 626-2710
(800) 793-7233
(270) 918-7830
DECEMBER 2017