Installing The Keyboard; Base Cover; Removing The Base Cover - Dell Precision 7520 Owner's Manual

Installing the keyboard

1 Align the keyboard and route the cables back through to the bottom of the compartment.
2 Press and align the keyboard to its compartment.
3 Replace the screws to secure the keyboard to the computer.
4 Slide the keyboard trim and align it to its position on the computer. Ensure that the keyboard trim clicks into its place
5 Connect the keyboard data cables to the touchpad board.
NOTE: Ensure that you fold the keyboard data cable in perfect alignment.
6 Affix the tape on the keyboard data cables.
7 Install the:
a hard drive
b battery
c battery cover
8 Follow the procedure in

Base cover

Removing the base cover

1 Follow the procedure in
2 Remove the:
a battery cover
b battery
3 To remove base cover:
a Remove the M2.5X5.0 screws that secure the base cover to the computer [1].
b Slide and lift the base cover away from the computer [2].
After working inside your computer.
Before working inside your computer.
Disassembly and reassembly 15