Installation - Hotpoint ultima digit wt640 Instructions For Installation And Use Manual

Installation


GB
Read these instructions carefully: the following
pages contain important information on installation
and suggestions on how the appliance works
Unpacking
1. Using scissors, cut
carefully along one corner
post to remove the film.
2. Lift off the polystyrene
top cap and remove the
corner posts.
3. Carefully lay the left
side of the machine
down onto the top cap.

We recommend that a
second person helps to raise
and lower the machine.
4
All manuals and user guides at all-guides.com
4. Remove the
polystyrene base.

IMPORTANT check
when unpacking your
machine:
5. Stand the machine
upright.

We recommend that a
second person helps to
raise and lower the
machine.
!
Continue to read the rest
of these instructions
carefully; the following
pages contain important
information on installation
and troubleshooting.
!
Protect the environment - please dispose of the
packaging material carefully and considerately.
!
This is the part of the

polystyrene base and
should have stayed intact
when you removed the
base.
!
If it has broken off and

is still in the machine…
remove it … while the
machine is still laying on
its side on the top cap.