Page 2
beginning Connecting Devices MIC *3–*6 USB *1 *2 *5 INSTRUMENT (L/MONO, R) PLUG-IN MIC GUITAR/ BASS *3 B type B type A type A type MONITOR LINE IN 2 LINE IN 1 *7 Type-C Lightning Type-C Lightning micro B micro B micro B micro B mini B...
Page 3
Connect the included USB cable first to the GO:MIXER PRO and then to your smartphone (p. 6). * If you are unable to record on your smartphone, slowly repeat step 2 once again.
Page 4
(*2) If connecting an Android smartphone to this unit, connect the tagged plug to this unit. (*3) You must connect your guitar, bass, or mic to this jack. If a mic and/or guitar are not connected, turn the [GUITAR/BASS] knob and/or [MIC] knob all the way to the left (the minimum setting).
Page 5
Phantom power supply iPhone, Android conditions iPad Using batteries Supplying power from the smartphone (USB) (*7) Sound from a device connected to the LINE IN 1 jack can be used for karaoke (p. 19).
Page 6
Connecting a Smartphone Three USB cables for connection to a smartphone are included with this device. By using these USB cables, you can supply power from a connected smartphone to this device. Connecting an iPhone or iPad This is a Lightning–USB cable for connecting this device to an iPhone or iPad.
Page 7
MEMO For information about smartphone compatibility, access the following link. http://roland.cm/gomixerprocp...
Page 8
beginning Adjusting the Volume Adjust the knob so that the PEAK indicator lights briefly when your performance is loudest. INSTRUMENT (L/MONO, R) PEAK PLUG-IN If this stays lit, the sound is too loud. GUITAR/ BASS MONITOR OUT *1...
Page 9
(*1) The [MONITOR OUT] knob adjusts the overall volume that is recorded. MEMO To adjust the volume of the devices connected to LINE IN 1 and LINE IN 2, use the volume controls of those devices.
Page 10
beginning Record Recording with a Camera App When you’re ready, use an app (such as a video camera) on your smartphone to record. Recording with the Camcorder for GO:MIXER App “Camcorder for GO:MIXER” is an app that lets you record video on your Android smartphone.
Page 11
Recording with the 4XCAMERA “4XCAMERA” is an app that lets you record video on your iPhone or iPad.
Page 12
beginning Connection Examples Here are some examples of connecting mics or instruments to this device. Make connections and settings as appropriate for the equipment that you’re using.
Page 13
Connecting a Mic MIC *1 *2 PLUG-IN MIC (*1) If you’re using a condenser mic that requires an external power supply, set the [PHANTOM POWER] switch to “48V. ” (*2) If you need to supply phantom power when using an iPhone or iPad, install batteries in this unit.
Page 14
Connecting a Guitar or Bass INSTRUMENT GUITAR/BASS *3 (L/MONO, R) *3 (*3) If you’re routing your guitar (or bass) through an effect device, connect it to the INSTRUMENT jacks.
Page 15
Connecting to the Headphone Jack of an Audio Player or Computer LINE IN 1 *4, LINE IN 2 (*4) Sound from a device connected to the LINE IN 1 jack can be used for karaoke (p. 19).
Page 16
Connecting a Keyboard INSTRUMENT (L/MONO, R) Connecting Monitor Speakers or Headphones MONITOR...
Page 17
Recording a Mix of Instrumental Performance and Smartphone Music USB *5 *6 LOOP BACK=ON PLUG-IN MIC INSTRUMENT (L/MONO, R) GUITAR/BASS LINE IN 1 LINE IN 2 LOOP BACK=ON *5 (*5) If you want to record video using your camera app or 4XCAMERA while playing back music from your smartphone, turn the [LOOP BACK] switch “ON.
Page 18
Multitrack Recording with a DAW USB *7 *8 PLUG-IN MIC INSTRUMENT (L/MONO, R) GUITAR/BASS LINE IN 1 LINE IN 2 LOOP BACK=OFF *7 (*7) If you want to use a DAW app to record your performance, set the [LOOP BACK] switch to the “OFF” position.
Page 19
beginning Using a Backing Track for Karaoke (CENTER CANCEL) The sound from the device connected to LINE IN 1 can be used for karaoke (*1). Set [CENTER CANCEL] to the “ON” position. CENTER CANCEL LINE IN 1 (*1) Depending on the sound, the instruments or vocals that are not in the center might not be canceled completely.
Page 20
beginning Using Batteries If you’re not supplying power from the smartphone, install batteries in this unit. Turn the battery cover counterclockwise to remove it. Insert batteries as shown in the illustration (pay attention to the polarity). Turn the battery cover clockwise to attach it.
Page 21
Set the [BATTERY] switch to the “ON” position. *1 (*1) Don’t operate the [BATTERY] switch while a smartphone is connected. Doing so might destabilize the smartphone’s operation. * If operating on batteries, the POWER indicator blinks when the batteries run low. If you continue using the unit in this state, the power automatically turns off after approximately one minute.
Page 22
beginning Block Diagram +48V PHANTOM POWER PLUG-IN MIC GUITAR/BASS Center Cancel LINE IN 1 CENTER CANCEL LINE IN 2 PEAK INSTRUMENT LOOP MONITOR BACK...
Page 23
Main Specification Roland GO:MIXER PRO: Audio Mixer for Smartphone Number of Audio Input 9 channels Channels Output 2 channels INSTRUMENT 1/4-inch phone (L/MONO, R) jacks type Stereo miniature LINE IN 1 jack phone type Stereo miniature LINE IN 2 jack...
Page 24
USB Type-C™ to USB micro-B type cable Registration Card (valid only in the US) * This document explains the specifications of the product at the time that the document was issued. For the latest information, refer to the Roland website. https://www.roland.com/...