Advertisement
Care & Cleaning
Do not leave plastic cooking utensils in contact
with the hot frypan surface while cooking.
Before cleaning, switch the frypan to the off
position and unplug from the power outlet.
Remove the Temperature Control Probe when
cooled from the probe socket of the appliance.
TEMPERATURE CONTROL PROBE
If cleaning is necessary, wipe the Temperature
Control Probe over with a slightly damp cloth.
Ensure it is completely dry before use.
Never immerse the Temperature Control
Probe, plug or cord in water or any other liquid.
NON-STICK COOKING SURFACE
Cooking on a non-stick surface minimises the
need for oil as food does not stick and cleaning
is easier.
Any discolouration that may occur on the
non-stick surface may detract from the
appearance of the frypan but will not affect the
cooking performance.
Do not use metal (or other abrasive) scourers
when cleaning the non-stick coating.
Wash with hot soapy water. Remove stubborn
spots with a soft plastic washing pad or nylon
washing brush. Rinse and dry thoroughly.
REMOVING DISCOLOURATION OF
THE NON-STICK SURFACE
1. Combine 2 tablespoons bicarbonate of
soda, ¼ cup household bleach, 1 cup water.
2. Pour into the frypan, place lid on with the
vent closed, and simmer for 5–10 minutes.
3. Clean in a well-ventilated area and avoid
breathing in the vapours. Wash as directed
before re-use. In some instances this may
not remove all the staining.
GLASS HIGH DOMED LID
Wash the lid in warm soapy water using a soft
sponge, rinse and dry thoroughly.
NOTE
Take care when the glass lid is hot. Do not
place hot lid under cold water or on cold
surfaces. This may cause the lid to break.
NOTE
Before inserting the temperature control probe
into the frypan socket, ensure the interior of
the frypan socket is fully dry. To do this, shake
out excess water then wipe the interior of the
socket with a dry cloth.
STORAGE
Store the temperature control probe carefully.
Do not knock or drop it as this can damage
the probe. If damage is suspected, return the
temperature control probe to your nearest
Breville Service Centre for inspection.
TIPS
For convenient storage of the temperature
probe, line the frypan with 2 sheets of kitchen
paper and place the probe on the kitchen
paper. This will ensure the probe and plug
don't scratch the surface.
9
Advertisement
