Schlage D-Series Brochure & Specs page 10

Latches
D-Series latches are adjustable for flat or beveled edge doors.
Latches and strikes are furnished in brass, bronze, or chrome
f inishes to be compatible with lock trim. When ordering,
specify quantity, part number, and finish. All D-Series latches
have throw and 1 housings except 2 ˝ backset latches,
which includes sleeve G506-815 to fill a 1˝ edge bore.
Standard latches are shown in bold type.
Latches
Backset Description
1 (29mm) x 2 (57mm) square corner
2
60mm 1" (25mm) x 2 (57mm) square corner
1 " (29mm) x 2 " (57mm) square corner
2
70mm 1 (29mm) x 2 (57mm),
(19mm) throw for pairs of fire doors
3
1 (29mm) x 2 (57mm) Square corner
95mm
Deadlatch
" Throw Anti-Friction Deadlatch for Pairs of Fire Doors
G506-815
Strikes
All Schlage strikes are furnished complete with screws.
The standard D-Series strike has a 1
When ordering separately specify quantity, product number,
f inish, and lip length. Standard strikes are shown in bold type.
Strikes
Number Lip Length Description
1 1
10-013 1 / ˝ (28mm) 1 / ˝ x 2
8 8
3
1 / ˝ (38mm)
4
1 1
10-016 1 / ˝ (28mm) 1 / ˝ x 2
8 8
box for 14-042 fire door latch
3 1
10-025 1 / ˝ (30mm) 1 / ˝ x 4
16 4
3
1 / ˝ (35mm)
8
K510-066 — Box for 10-025 ANSI strike
10
Deadlatch Springlatch
Throw Throw
14-047
14-048
13-047 13-048
_
14-042
14-028 14-010
Springlatch
lip.
3
/ ˝ (28mm x 70mm) Square corner, box
4
3 3
/ ˝ (28mm x 70mm), / ˝ (19mm) deep
4 4
7
/ ˝ (32mm x 124mm) ANSI
8
Long Backsets
D-Series locks with 5˝ backsets are normally furnished with
1 ˝ faceplates and 1˝ housings. Links installed in metal doors
require one A501-567 sleeve and 43-005 (order separately) to
join latch and link.
2-3/4˝ Latch Extension
Link
(43-005)
–
–
Door Reinforcement
Schlage 37-001 reinforcing kit is used to
reinforce and help prevent the collapse of
hollow metal doors when locksets are
tightly mounted.
This kit should be used with long backsets for D-Series lock
installations in hollow metal doors to prevent lateral
movement of the latchbolt. Specify door thickness, 1
or 1 , when ordering reinforcement kits.
Reinforcement Kit
(37-001)
Sleeve
(A501-567)
ANSI Strike–Standard
(10-025)
1 7 3
1 / ˝ x 4 / ˝ x / ˝
4 8 32
Rabbeted Latch and Strike Kit
Rabbeted latch and strike kit finishes: 605, 626.
This kit adapts square corner latches and 2
strikes for (13mm) rabbeted door and frame preparations.
˝
Rabbeted Latch
and Strike Kit
(39-030)
Sleeve
(A501-567)
(add to 2 "
backset
latch)
Reinforcement
1 3 / ˝ doors (A501-566) or
4
1 / ˝ doors
3 (A501-565)
8
Square Corner Box Strike
(10-013)
1 3 3
1 / ˝ x 2 / ˝ x / ˝
8 4 32
3 (28mm) high
/ ˝
4