Advertisement
OWNERS
MANUAL
Model No.
45-0187
CAUTION:
Read Rules for
Safe Operation
and Instructions
WMV-
Digitally signed by WMV-Dresden
PRINTED IN USA
DN: cn=WMV-Dresden, c=DE,
o=WMV-Dresden,
Dresden
email=noreply@wmv-dresden.de
Date: 2017.01.26 13:00:36 +01'00'
BROADCAST SPREADER 160
Carefully
303 WEST RAYMOND
Assembly
Operation
Maintenance
Repair Parts
SULLIVAN, ILLINOIS 61951
Advertisement
Table of Contents
Related Manuals for Agri-Fab broadcast spreader 160
Summary of Contents for Agri-Fab broadcast spreader 160
- Page 1 OWNERS MANUAL Model No. 45-0187 BROADCAST SPREADER 160 CAUTION: Read Rules for Safe Operation Assembly and Instructions Operation Carefully Maintenance Repair Parts 303 WEST RAYMOND SULLIVAN, ILLINOIS 61951 WMV- Digitally signed by WMV-Dresden PRINTED IN USA DN: cn=WMV-Dresden, c=DE, o=WMV-Dresden, Dresden email=noreply@wmv-dresden.de...
-
Page 2: Carton Contents
RULES FOR SAFE OPERATIONS Remember, any power equipment can cause injury if operated improperly or if the user does not understand how to operate the equipment. LOOK FOR THIS SYMBOL TO POINT OUT IMPORTANT SAFETY PRECAUTIONS. MEANS -- ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED. - Page 3 FIGURE 2 - HARDWARE PACK QTY. DESCRIPTION QTY. DESCRIPTION Hex Bolt 1/4-20 x 1-3/4" Long Hex Lock Nuts 3/8-16 Thread Hex Lock Nuts 1/4-20 Thread Spacers Hand Knob Flat Washers 1-5/8" O.D. Nylon Washer Grip Cotter Pin 3/32" x 3/4" Long Hex Bolt 1/4-20 x 5/8"...
-
Page 4: Assembly Instructions
ASSEMBLY INSTRUCTIONS 3/8" FLAT TOOLS REQUIRED FOR ASSEMBLY CROSSOVER WASHER 3/8" LOCK TUBE Pliers Open or Boxed End Wrench 9/16" Open or Boxed End Wrench 1. Remove the spreader, loose parts and hardware package from the carton. See figures 1 and 2. 2. - Page 5 9. Place wheel assembly without hole through hub 11. Turn the broadcast spreader over so that it rests (air valve to the outside) onto axle end having the on its wheels. smallest and secure with 1-5/8" dia. flat washer 12. Assemble the hitch bracket to the hitch tube. See and 1/8"...
- Page 6 18. Hook free end of flow control rod through hole in 15. Assemble the flow control arm to the flow control slide gate bracket located near bottom of hopper. mounting bracket using one 1/4" x 5/8" hex bolt See figure 12. and one 1/4"...
- Page 7 20. Assemble the flow control gauge onto the flow control mounting bracket as shown in figure 14. Secure with nylon washer and hand knob. PLASTIC KNOB NYLON WASHER FLOW CONTROL GAUGE FLOW CONTROL FLOW CONTROL MOUNTING BRACKET FIGURE 14 21. Move flow control arm to off position and slide flow control mounting bracket toward hopper until clo- sure plate (located in bottom of hopper) is com- pletely closed.
-
Page 8: Operation
OPERATION MATERIAL TYPE Flow Rate Setting At 3 M.P.H. The application spray pattern should overlap to insure Light Heavy uniform coverage at the edges. The approximate distance between each pass is shown in the applica- FERTILIZER Granular tion diagram. See figure 15. Pelleted APPLICATION DIAGRAM GRASS SEED... -
Page 9: Maintenance And Storage
6. Heavy moisture conditions may require a cover MAINTENANCE & STORAGE over the hopper to keep contents dry. The vinyl cover acts as a wind and moisture shield, but should not be used as a rain cover. See figure 18. 1. - Page 10 REPAIR PARTS BROADCAST SPREADER MODEL 45-0187 9 57 21 22...
- Page 11 REPAIR PARTS LIST FOR BROADCAST SPREADER MODEL 45-0187 REF. PART QTY. DESCRIPTION REF. PART QTY. DESCRIPTION 44480 Hopper 43070 3/8" Flat Washer 43882 Rivet 41576 Bolt, Hex 3/8-16 x 1-3/4" Lg. 62482 Ass'y - Guide Closure 44469 Flow Control Rod 44462 Tube Frame 23525...
- Page 12 REPAIR PARTS 303 West Raymond Sullivan, Il. 61951 217-728-8388...