Advertisement
Quick Links
JOHN DEERE 4 FAMILY
HEATER KIT
P/N 9PH20S58
FITS 4044R, 4052R, 4066R
The contents of this envelope are the property of the owner.
Be sure to leave with the owner when installation is complete.
APPROXIMATE INSTALLATION TIME: 1 HOUR
Rev. A, p. 1 of 4
(8/4/2015)
p/n: IM-9PH20S58
Advertisement
Summary of Contents for Curtis 9PH20S58
- Page 1 Rev. A, p. 1 of 4 JOHN DEERE 4 FAMILY HEATER KIT P/N 9PH20S58 FITS 4044R, 4052R, 4066R The contents of this envelope are the property of the owner. Be sure to leave with the owner when installation is complete.
- Page 2 p. 2 of 4 BEFORE YOU START HELPFUL REMINDERS: A. Read and understand all instructions before beginning. B. To avoid injury caused by hot engine coolant, make sure the engine is completely cooled down before beginning installation of heater. TOOLS REQUIRED: Set of standard and metric sockets Scissors Drain Pan...
- Page 3 p. 3 of 4 STEP 3 CONTINUED Per figure 3.3, route the open end of the hoses toward the front of the engine where the 3/8” NPT nipples were installed in step 1.2 Connect the hoses to the nipples with hose clamps provided, see fig.
- Page 4 Warning: To avoid engine damage, remove the clamp as soon as heater gets warm. Reattach heater to the bracket. Fig. 4.7 HEATER SERVICE PARTS DESCRIPTION 20,000 BTU HEATER 8SV-9PH20WG HEATER MANUAL IM-9PH20S58 HEATER SWITCH 9SV-OHC6 HEATER SWITCH COVER 9SV-9PCD1B HEATER WIRE KIT 9SV-KX9HTRWH1 20’ HEATER HOSE 9SV-HRH61-20 1”...