Illustrated Parts List - Sarlo WeedBoss SS-18 Owner's Manual

ILLUSTRATED PARTS LIST

1
SEE FIG.
STRAIGHT SHAFT TRIMMER SS-18
Part Number Model Used On
10000 BC-8/SS-18/CS-16
10001 SS-18
10002 SS-18/CS-16
10003 SS-18
10005 SS-18
10007 SS-18
10009 SS-18
10010 BC-8/SS-18
10011 SS-18
10012 SS-18
10013 SS-18
10014 CS-16/SS-18/BC-8
10015 CS-16/SS-18/BC-8
10016 CS-16/SS-18/BC-8
10017 CS-16/SS-18/BC-8
10018 SS-18
10021 SS-18
10022 SS-18
10023 SS-18
10025 SS-18
10026 SS-18
10031 SS-18
10032 SS-18/CS-16
10033 SS-18/CS-16
10041 SS-18/CS-16
10042 SS-18
10043 SS-18
10052 BC-8/SS-18
10053 BC-8/SS-18
10069 SS-18
10235 SS-18/CS-16
10236 SS-18/CS-16
Engine SS-18/CS-16
Quantity Description
1 Decal for pipe
1 Pipe assembly
1 Label
1 Pipe assembly without flex shaft
1 Owner's manual
1 Bolt for gear case clamp
1 Plastic gear case hood
1 Regular flexible shaft with stopper
1 Gear case 3 bearing without holder and cover
1 Holder A
1 Guard assembly
1 Nose cone A
1 Nose cone B
2 Nose cone screws
1 Engine clamp assembly
1 Protector without blade
1 Blade to cut nylon code
2 Bolts for blade
2 Nuts for blade
1 Clamp for guard
2 Bolts for clamp
1 Tap and go with diameter 0.095"
1 Single type lever
1 On/Off switch
1 Cable, throttle
1 Handle assembly
1 Handle
1 Hanger assembly
1 Harness assembly
2 Bolts
3 Screws for loop handle
3 Nuts for loop handle
1 Engine 34cc 4-cycle Briggs & Stratton, Model 21032 0118 E1
WARNING: IT IS UNSAFE TO USE ANY AFTER MARKET HEAD,
ATTACHMENT, ACCESSORY OR BLADE ON THIS UNIT. USE
ONLY HEADS, ATTACHMENTS, BLADES AND ACCESSORIES
MANUFACTURED BY SARLO AND INTENDED FOR THIS
SPECIFIC MODEL.
1
GB