Table of Contents
Advertisement
XL665_IFU_US_EN.book Page 15 Friday, April 3, 2009 11:51 AM
2
Place the handset on the base.
Note
Handset may get warm during initial
charging. This is normal. The handset may
take a few seconds to power up.
4.4
Checking the battery level
The battery icon displays the current
battery level.
Battery full
Battery empty. Require
charging.
Your handset may power down shortly if
it is not charged after the battery is
empty. If you are on the phone when the
battery is nearly empty, you will hear
warning tones. Your call may be cut off
shortly after the warning.
4.5
Setting the clock
Your phone has a digital clock. Set the
clock before initial use of the phone.
Getting started
4.5.1
Setting the date and time
1
Press
.
MENU
2
Select
DATE & TIME
. Press
OK
enter
mode.
SET DATE
3
Use the digit keys to enter the date.
4
Press
.
OK
• The handset displays the time
editing screen.
5
Use digit keys to enter the time.
(
Press the right softkey
select
AM
or
PM
.
6
Press
.
OK
• The setting is saved.
4.6
What is standby mode?
Your phone is in standby mode when it is
idle. The standby screen displays the handset
name, the handset number, the signal icon,
and the battery icon.
Note
When the phone is idle for a few seconds,
the backlight of your phone will go off. If the
phone is left idle for the next 20 seconds, it
will switch to
SCREENSAVER
mode
displaying the time in digital clock format.
4.7
Checking the signal strength
The signal icon
displays the link status
between your handset and the base station.
A steady icon means your handset and the
base station are linked. A flashing icon
means your handset and the base station
are not linked.
If you move too far away from the base
station while you are on the phone, you
will hear warning tones notifying you that
your handset is almost out of range - lost
link. Take your handset closer to the base
station or your call may be cut off shortly
after the warning.
to
to
15
Advertisement
Table of Contents
