Assembling the Bracket to Match the Display Unit Installation Pitch
This wall-hanging-bracket is a VESA standard compliant bracket.
The plates to use and lock screw positions differ depending on the installation pitch and orientation (landscape or
portrait) of the display unit.
Confirm the installation pitch of the display unit to be installed and then select the center base plate and set the
screw positions of the side base plates and set mounts.
Assembly Diagrams
For the installation pitch of the display unit, check the specifications or instruction manual of the corresponding
display unit at the following website.
https://panasonic.net/cns/prodisplays/download/spec_manual/
■ Setting installation pitch (400 x 400): Landscape or portrait orientation
When viewed from front
(Unit : mm)
Side base plate
When viewed from back
z This surface contacts the wall.
Base plate upside (R)
Side base plate
Base plate downside (R)
8 - ENGLISH
Base plate upside (L)
A-1
Center base plate 400
A-10
Base plate downside (L)
A-3
A-2
A-10
A-4
Base plate upside (R)
A-2
Side base plate
A-8
A-10
Base plate down-
side (R)
A-4
720.8 (28.4")
A-1
A-2
A-3
A-4
A-8
A-10
C-1
732.6
(28.9")
Base plate upside (L)
A-1
Side base plate
A-10
Base plate downside (L)
A-3
(PCS)
1
1
1
1
2
2
20