For Zooming In And Out The Images - Sanyo PLC-XW57 Owner's Manual

For zooming in and out the images

Digital zoom +
When the D.ZOOM + (
Menu disappears and the message "D. zoom +"
is displayed. Press the D.ZOOM
button to expand the image size. And press the
▲▼◄►
Point buttons to pan the image. The Panning
function can work only when the image is larger than
the screen size.
Digital zoom –
▼
When D.ZOOM – ( ) is pressed, the On-Screen Menu
disappears and the message "D. zoom –" is displayed.
Press the D.ZOOM
compress image size.
To exit the Digital zoom +/– mode, press any button
▲▼
except the D.ZOOM
buttons.
To return to the previous screen size, select a screen
size from the Screen Size Adjustment or select an input
source from the Input Source Selection (p.5) again, or
adjust the screen size with the D.ZOOM
▲
) is pressed, the On-Screen
▲
or the SELECT
▼
or the SELECT button to
buttons, SELECT, and Point
▲▼
buttons.
Computer Input
Remote Control

Note:
• T h e p a n n i n g f u n c t i o n m a y n o t
operate properly if the stored Mode
in the PC Adjust Menu is used.
(p.9)
• The minimum compression ratio
can be limited depending on the
input signal or when the Keystone
function is working.
• True, Full, and Digital zoom +/–
cannot be selected when 480i, 575i,
480p, or 575p is selected in the PC
System Menu (p.6).
• Digital zoom +/- cannot be selected
when Full or True is selected.
POINT buttons
SELECT button
D .ZOOM + button
D .ZOOM - button
33