PREPARATION
NAME OF EACH PART OF PROJECTOR
FRONT
FOCUS RING
ZOOM LEVER
BACK
TOP CONTROLS
AND INDICATORS
BOTTOM
✽
AIR INTAKE VENTS
AND AIR FILTERS
LAMP COVER
INFRARED
REMOTE RECEIVER
PROJECTION LENS
LENS COVER
SPEAKER
EXHAUST VENTS
HOT AIR EXHAUSTED !
Air blown from Exhaust Vents is hot. When using or
installing projector, following precautions should be taken.
G Do not put any flammable object near these vents.
G Keep front grills at least 3'(1m) away from any object,
especially heat-sensitive objects.
G Do not touch this area, especially screws and metallic parts.
This area will become hot while a projector is used.
This projector detects internal temperature and
automatically controls operating power of Cooling Fans.
✽
This projector is equipped with Cooling
Fans for protection from overheating.
Pay attention to the following to ensure
proper ventilation and avoid a possible
risk of fire and malfunction.
G Do not cover vent slots.
G Keep back and bottom clear of any
POWER CORD CONNECTOR
TERMINALS
AND CONNECTORS
AIR INTAKE VENTS
object. Obstructions may block
cooling air.
ADJUSTABLE FEET
AND
FEET LOCK LATCHES
7