Video System Selection - Sanyo PLC-SW30 Owner's Manual

Video Input

Video System Selection

1 Press MENU button to display the On-Screen Menu. Press
Point 7 8 buttons to move the red frame pointer to AV System
Menu icon.
2 Press Point d
system that you want to select and then press SELECT button.
Video Jack or S-Video Jack
Auto
The projector automatically detects incoming video system, and
adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select system manually.
PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N
If projector cannot reproduce proper video image, it is necessary to
select a specific broadcast signal format among PAL, SECAM, NTSC,
NTSC 4.43, PAL-M, and PAL-N.
COMPUTER IN / COMPONENT IN Jack ( Y, Pb/Cb, Pr/Cr)
Auto
The projector automatically detects incoming Video signal, and adjusts
itself to optimize its performance.
COMPONENT VIDEO SIGNAL FORMAT
If the projector cannot reproduce proper video image, it is necessary
to select a specific component video signal format among 480i, 575i,
480p, 575p, 720p, 1035i and 1080i.
32
button to move the red arrow pointer to the
AV SYSTEM MENU (VIDEO OR S-VIDEO)
AV System Menu icon
This box indicates the
system being selected.
Move the pointer to
the system and press
SELECT button.
AV SYSTEM MENU (COMPONENT VIDEO)
AV SYSTEM Menu icon
This box indicates the
system being selected.
Move the pointer to the
system
SELECT button.
and press