Dtv Back-Jacks Locations & Functions; Glossary Of Cables - Sanyo HT27745 Owner's Manual

HDTV BACK— JACKS LOCATIONS AND FUNCTIONS
COMPONENT VIDEO INPUT
ANALOG
COMPO 3
AUDIO
OUTPUT
L
(MONO)
R

Œ
Component Video Input (COMPO 2)—Connect
digital video equipment to the Y, Pb, Pr and Video 2
Audio L/R jacks. These jacks will automatically detect
the type of signal being received (HDTV, EDTV, or
SDTV). (See page 9.)

S-Video (Video 1 and 2) Input—To enhance video
detail, use the S-Video (Video 1/2) jacks instead of the
Video jacks, if available on your external equipment.
(S-Video connections will override connections to the
Video 1/2 input jacks.) (See page 10.)
Ž
Digital Audio Output—Use an Optical Audio cable to
connect the Digital Audio Output to an advanced
stereo home theater system equipped with Dolby
Digital 5.1. (See page 9.)

Analog Audio Out (L/R) Jacks—Connect external
audio equipment here. (See page 10.)
Audio Cables—Provides analog left /right
audio for your external equipment connec-
tions.
Component: Y, Pb, Pr—Use these cables
to connect your component equipment.
This connection provides the best picture,
but does not include sound. (Cable colors:
Y = green, Pb = blue, and Pr = red.)
Composite Audio/Video (RCA type)—
Use these cables for standard analog
audio/video connections. Normally cables
are color coded: Yellow for Video, White for
(L) Audio, and Red for (R) Audio.

Œ
VIDEO AUDIO INPUT
VIDEO 2 VIDEO 1
S-VIDEO
COMPO 2 AUDIO 3
Y
VIDEO
P
b
L
AUDIO (MONO)
P
r
R
 ‘

GLOSSARY OF CABLES

Ž
DIGITAL
ANTENNA IN
UHF/VHF/CATV
L
’ “

Component Video Input (COMPO 3)—Connect
digital video equipment to the Y, Pb, Pr and Audio 3
(L/R) jacks. These jacks will automatically detect the
type of signal being received (HDTV, EDTV, or SDTV).
(See page 9.)
‘
Audio/Video Input (VIDEO1/VIDEO2)—Connect
standard video equipment here. (See page 10.)
S-Video1/2 connections override the AV1/2
NOTE:
video composite connections.
’
Analog Antenna Input (UHF/VHF/CATV)—Connect
an RF antenna, cable, or satellite receiver to this ter-
minal as shown on page 5.
“
®
Digital Antenna Input—Connect an RF antenna to
this terminal as shown on page 5.
”
Service Terminal—For technical use only.
Coaxial Cable—Used to connect a signal to
your digital or Analog RF Antenna In terminal.
Optical Digital Audio—Use this cable to
connect the DTV 's digital audio output to a
multi-channel audio receiver.
S-Video Cable—This cable provide separate
luminance and color signals for higher reso-
lution and better picture quality. Use this
cable instead of the regular composite video
cable (RCA type), when available.
NOTE: None of these cables are supplied with this DTV.
Need help?
Visit our Web site at
DIGITAL
AUDIO
OUTPUT
SERVICE
”
www.sanyoctv.com
1-800-877-5032
or Call
7