Sleep Timer Operation; Maintenance - Sanyo DWM-2500 Instruction Manual

Sanyo instruction manual dvd home theater system dwm-2500

Hide thumbs Also See for DWM-2500:

Quick manual (4 pages)

Table Of Contents

Table of Contents

The sleep timer automatically switches off the power after a

preset time has elapsed. The volume will gradually be reduced

(fade-out) during the 1 minute period before the unit turns off.

There are 4 time periods available: 30, 60, 90, and 120 minutes.

Press [SLEEP] repeatedly while holding [SHIFT] down to select

the desired sleep time. "SLEEP" and the selected time blink on

the FL display.

After several seconds, the original display returns and the

brightness of the display reduces. "SLEEP" blinks.

To check the remaining sleep time

Press [SLEEP] once while holding [SHIFT] down. The remaining

time is displayed.

After several seconds, the original display returns.

To release the sleep timer while in operation

Press [SLEEP] repeatedly while holding [SHIFT] down until

"SLEEPOFF" appears.

The timer is also released if the power is switched off.

WARNING:

FOR YOUR PERSONAL SAFETY, BE SURE TO

DISCONNECT THE AC POWER CORD BEFORE

PROCEEDING WITH ANY MAINTENANCE OR CLEANING.