Thank you for purchasing this Panasonic product. Please read these instructions carefully before attempting to install, operate or service the Panasonic product. Please carefully read the “GENERAL SAFETY INFORMATION” Failure to comply with instructions could result in personal injury or property damage.
GENERAL SAFETY INFORMATION For Your Safety To reduce the risk of injury, loss of life, electric shock, fire, malfunction, and damage to equipment or property, always observe the following safety precautions. Explanation of symbol word panels The following symbol word panels are used to classify and describe the level of hazard, injury, and property damage caused when the denotation is disregarded and improper use is performed.
GENERAL SAFETY INFORMATION CONTINUED Do not disassemble the unit for reconstruction. It may cause fire or electric shock. A statement to the effect that when the product is to no longer be used, it must not be left in place but remove, to prevent it from possibly failing. Ceiling joist must be subjected to static load more than five times the weight of the product.
PLEA SE R EA D PR I O R T O I N ST A LLI N G T H I S FA N CO N T I N U ED the fans are built to run continuously at a pre-set lower level (FV-0511VKS2 and FV-0511VK2: 0, 30, 40, 50, 60, 70, 80, 90, 100 CFM;...
The Pick-A-Flow switch on the face of all WhisperGreen Select fans allows the option to choose 50 – 80 – 110 CFM for the FV-0511VK2, FV-0511VKS2 or 110 – 130 – 150 CFM for the FV-1115VK2. These fans can run continuously or intermittently, depending upon the needs of the owner.
INDICATION (PLUG ‘N PLAY FUNCTION DEVICES) CONTINUED Humidity selector range from aroun 30% to 80%. Factory setting is around 50%. Timer preset selector positions Timer [min] Factory setting : 20 minutes. Position ” ” : For factory use 1. The product will run when environment humidity rise rapidly but not reach to the humidity setting, and stop after delay preset time.
INSTALLATION (PLUG ‘N PLAY FUNCTION DEVICES) You can purchase the specified Plug ‘N Play devices that are explained on page 6-7 and install them in positions . Position can only be used with Multi-Speed module (model FV-0511VKS2 already have this control installed), position can be used for any of the other optional control modules.
Page 9
INSTALLATION (NEW CONSTRUCTION) CONTINUED 7. Refer to wiring diagram on page 5. W H I TE Conduit BLA CK Follow all the local electrical safety codes as well as the National Electrical GREEN Junction Earth ground Code (NEC). Using UL approved wire Wire nuts nuts, connect house power wires to Switch box...
INSTALLATION (NEW CONSTRUCTION) CONTINUED 12. Insert the other mounting spring into the slot as shown and mount grille to fan body. (Fig.10) Ceiling Mounting spring Gloves Grille CAUTION Fig.10 Mount grille carefully so that lead wire is not pinched. Attention: when the switch is at the “ON” position, wait 8 – 10 seconds for the Fan to start.
MAINTENANCE (CLEANING) WARNING Mounting spring Disconnect power source before working on unit. Grille Slot Gloves Fig.14 CAUTION Clasp Routine maintenance must be done every year. Please wear gloves during the cleaning work. Ceiling Never use gasoline, benzene, thinner or any other such chemicals for cleaning the ventilating fan.
Warning Concerning Removal of Covers. The unit should be serviced by qualified technicians only. Your product is designed and manufactured to ensure a minimum of maintenance. Should your unit require service or parts, call Panasonic Call Center at 1-866-292-7299 (USA) or 1-800-669-5165 (Canada). Panasonic Corporation of North America Panasonic Canada lnc.