Setting Up To Your Home Network; Wireless Lan Connection - Sanyo NET@ DP47460 Network Manual

SETTING UP TO YOUR HOME NETWORK _______________

WIRELESS LAN (LOCAL AREA NETWORK) CONNECTION
Enable your HDTV's network connection by hooking up
the supplied WiFi USB dongle to any of the two USB
ports on your HDTV.
(For a Wired connection with an Ethernet
cable please see page 5.)
WiFi USB
AUDIO (DVI)
dongle
SCANNING FOR ACCESS
POINTS
1. Turn on your HDTV and press the
MENU key.
HDTV SIDE
2. Use the CURSORLM keys to select
PANEL
the Setup option from the main menu
and press ENTER.
3. Select the Network option and press ENTER.
4. Select the Wireless option and press ENTER.
5. Select Scan Access Points and press ENTER to look for
a wireless LAN.
NOTE: The Access Point with stronger signal appears higher
in the list.
6. Press the CURSOR M key to highlight Select Network
and press ENTER.
7. Select the Access Point for the wireless network you
wish to connect to and press ENTER.
8. Choose the network's type of security protocol and
press ENTER. Follow the on-screen instructions to
complete your HDTV's setup to the wireless network.
After completing the wireless network setup check your
TV's network connection by performing a Connect Test
(see page 6.)
www.sanyoctv.com
Need help?
NETWORK SELECTION SCREEN
ACCESS POINT SCREEN
(SCAN ACCESS POINTS)
ACCESS POINT SCREEN
(SELECT NETWORK)
SECURITY PROTOCOL SCREEN
1-877-864-9604
3