A&D TM-2441 Instruction Manual page 86

To suspend A-BPM
Step 1. Set the AUTO switch to "OFF".
Step 2. The
To Stop during A-BPM
When the START/STOP switch is pressed during the blood
pressure measurement, the air is exhausted immediately and the
current measurement is stopped. However, A-BPM is continued.
The next blood pressure measurement is performed in
accordance with A-BPM settings.
To measure blood pressure during A-BPM immediately
(Manual blood pressure measurement of A-BPM)
Step 1. If the indication of the OLED display is hidden, press the
START/STOP or EVENT switch to return to the display of
A-BPM waiting mode. A-BPM waiting mode is a state that
blood pressure is not measured during the interval time.
Step 2. Press the START/STOP switch during A-BPM waiting mode.
To expand the interval time, or bring back it
When sleep mode is "ON" and the EVENT switch is pressed
during A-BPM waiting mode, the interval time is doubled.
mark is hidden. A-BPM is suspended.
68