Advertisement
Now, you can use the Web management interface to
continue the Managed Media Converter management, please
refer to the user manual for more.
For security reason, please change and
memorize the new password after this first
setup.
Note
4. While IP Address be changed or
forgotten admin password –
To reset the IP address to the default IP Address
"192.168.0.100" and the password to factory default
mode (default user name and password is admin). Press
the hardware reset button at the front panel about 10
seconds. After the device is rebooted, you can login the
management Web interface within the same subnet of
192.168.0.xx and default user name / password.
TX
Hardware Reset
Managed Converter
10/100Base-TX to 100Base-FX
RX
FX TX
LNK /
ACT
RESET
PWR 100
10/100Base-TX
ACT
LNK
– 5 –
5. Customer Support
Thank you for purchase PLANET products. You can browse
our online FAQ resource at the PLANET Web site first to
check if it could solve you issue. If you need more support
information, please contact PLANET Media Converter support
team.
PLANET online FAQ :
http://www.planet.com.tw/en/support/faq.php?type=3
Media Converter support team mail address:
support_converter@planet.com.tw
Copyright © PLANET Technology Corp. 2010.
Contents subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology
Corp.
All other trademarks belong to their respective
owners.
– 6 –
Advertisement
