Configure a Gateway 3 (G-240W-E)
Procedure 26
96
IP filter configuration
1
Select Security > IP filter from the top-level menu in the Ethernet Gateway window, as shown
in Figure 34.
Figure 34
IP filter window
Table
32
describes the fields in the IP filter window.
Table 32
IP filter parameters
Field
Enable IP Filter
Mode
Internal Client
Local IP Address
Source Subnet Mask
Remote IP Address
Destination Subnet Mask
Protocol
2
Configure the IP filter.
3FE-47464-AAAA-TCZZA
Description
Select this check box to enable an IP filter
Choose an IP filter mode from the drop-down menu:
•
Drop for upstream
•
Drop for downstream
Choose an internal client from the drop-down menu:
•
Customer setting - uses the IP address input below
•
IP - uses the connecting devices' IP to the
Local IP address
Source subnet mask
Remote IP address
Destination subnet mask
Choose an application protocol or all from the drop-down menu
Nokia WiFi Gateway 3 Product Guide
Issue: 01