Panorama Mode - Sanyo VPC-T1060 Instruction Manual

Panorama Mode

This mode is designed to make it easier to take a series of shots then stitch them
together with software on your computer to make a single photo. You can capture a
photographic subject that won't fit into a single frame, such as a landscape, and stitch it
together later with a program such as Cool 360 or Photoshop application.
1. Set the camera mode to [
2. Press the
3. Press the button.
4. Select [Panorama] with the
5. Press the MENU button.
6. Press the or
( :left to right) or ( :right to left)
7. Shoot the first image.
The next image appears beside the previous image.
8. Orient the camera so that the second frame overlaps a small portion of the
photographic subject of the first image and press the shutter button to capture the
next image.
9. Follow the same steps to capture subsequent images in the sequence.
10. Finish the sequence by pressing the
recorded.
(e.g.: Editing with COOL 360 SE)
COOL 360 SE - combines ease-of-use, power and flexibility to allow even novice digital
imaging enthusiasts to move beyond traditional photos into immersive imaging. Its intui-
tive interface and easy-to-use wizard deliver great-looking panoramas while advanced
warping, blending and alignment tools ensure excellent results.
To install software:
1. Insert the CD-ROM that came with the camera into your CD-ROM drive.
The welcome screen appears.
2. Click the respective software name.
Follow the on-screen instructions to complete the installation.
EN-24
].
P
button.
/ buttons, and press the
button to select the shooting direction.
button.
button after the last image has been