Specifications - Sanyo MEGAPIXEL VCC-HD5400 Setup Manual

Specifications

■
Camera
Image pickup device
Effective pixels
Lowest image
illumination
Video S/N ratio
Lens
Rotational scope
Rotation speed
Preset position
Auto mode
Privacy mask
Motion sensor
Auto pursuit
Sway compensation
Language selection
For further details on the specifications of the camera, refer to the electronic manual.
■
I/O
Video output
LAN
EX-HDD Connector
SD Card Slot
Alarm input
Alarm output
Audio input/output
Communication method
Protocol
Baud Rate
Address
■
Recording media
SD memory card
External HDD
For the recommended SD memory cards or hard disks, visit our website.
http://www.sanyosecurity.com/
1/2.5" CMOS sensor
16:9 1920 (H) × 1080 (V), 4:3 1600 (H) × 1200 (V)
50IRE: 2.0 lx (F1.8, in color mode with high gain)
50IRE: 0.1 lx (F1.8 in black-and-white mode with high gain)
50 dB or higher (when AGC is 'OFF')
Focal Length: f=6.3 - 63 mm, F number: F1.8 - 2.5
Optical zoom 10x, electronic zoom 16x (up to 160x when used in
combination with the optical zoom)
Pan: 360° endless pan
Tilt: –20 to +200°
Pan: Max. 350°/sec
Tilt: Max. 350°/sec (0.1° - 120°/ sec for manual operation)
Max. 256
Sequential, auto pan, tour, automatic return
ON/OFF, up to 32 positions
ON (detection area setting, video analytics)/OFF, face detection function
ON/OFF
ON/OFF
English, French, German, Spanish, Japanese
HD Output: HDMI terminal (TYPE C)
Monitor output: BNC terminal (MONITOR OUT)
10BASE-T/100BASE-TX (RJ-45 connector)
For connecting an external hard disk drive case
1 (SDHC compliant, max. 32 GB supported)
4 (NO/NC), also used for switching between day and night modes
2 (NO/NC, 16V, 150 mA, open collector)
Audio input (white: 3.5-mm mini jack)
Audio output (black: 3.5-mm mini jack)
RS-485
SSP, PELCO-D
2400, 4800, 9600, 19200
1 - 255 (sanyo SSP: 1 to 127)
Normal recording, alarm recording, backup video recording in event of a
network failure, log information
14