BASICS
Receiving a call
When an incoming call is received, the LED on the handset flashes, and
the handset will show caller information. *
* Note: A subscription is required from your local phone company to
receive Caller ID information on your phone. See Caller ID Features,
page 16.
1. Press TALK/CALL BACK to answer the call.
Note: If handset is in the base cradle, remove it from base before
pressing the TALK/CALL BACK key.
2. Press TALK/CALL BACK to end your call.
Note: If you replace the handset to the base cradle, the handset
automatically hangs up.
Making a call
1. Press TALK/CALL BACK.
Note: If handset is in the base cradle, remove it from base before
pressing the TALK/CALL BACK key.
2. Dial the phone number. The screen shows the number as you enter it.
Channel No.
3. Press TALK/CALL BACK to end your call.
Volume adjustment
The VOLUME key adjusts the volume level of the earpiece. There are 4
volume levels.
1. Make sure the phone is in TALK mode.
2. Press the CID/VOL
Ringer switch
The RINGER switch must be on for the handset to ring during incoming
calls.
Volume Level
Call Timer
or
key on the handset.
13
Telephone Number